ElectronicaRC are official Dealers for Dji in SPAIN.
NOTE: USED PRODUCT (Second Hand). Only Naza M V.2 main controller.
INCLUDED:
1 x Naza-M V.2 multi-axis control
DJI continues innovating, improving and bringing exciting new products to the market. We integrated our latest technology into the NAZA V2
What’s new with the NAZAM V2 : Hardware
- PMU V2: New case design with CANBUS port. Enhanced BEC functionality, better heat dissipation. With extra CANBUS ports, enhances the expandability of the system and will support: Gopro Zenmuse, iOSD and Bluetooth module for assistant software use on smart phones in the future, etc.. **NAZA V1 can also be upgraded using PMU V2 and support Gopro Zenmuse, iOSD and Bluetooth module..**
- Main Controller The hardware structure has been optimized and the expandability and performance of the flight control system has been enhanced
- Independent LED Module
What’s new with the NAZAM V2 : Firmware and functions
- New attitude stabilization algorithm, provides better flight performance / maneuverability;
- New flight control performance, provides better flight experience; (flight control is smoother, take-off is easier)
- Support for Octo-rotor;l
- One-motor stopped still can land safely (Hexa-rotor, Octo-rotor)
- Automatic course deviation compensation, reduced the effects of magnetic disturbance; interference around the compass detection & warning;
- Added IMU advanced calibration, error identification and warning, reduced the impact of sensor error to the flight performance;
INCLUDED:
1 x USED NazaM V.2 multi-axis control support Octo-rotor
• Manual, firmware and driver. • Videos • Wiki
FEATURES:
- All-in-one Design - Independent PMU V.2 with amazing function extension (Bec and port Cambus). Supported: IOSD, Zenmuse H3-2D Gimbal and bluetooth LED - Advanced & Improved Attitude Stabilization Algorithm - Nine Types of Multi-rotors Supported: Quad I, Quad X; Hexa I, Hexa V, Hexa Y, Hexa IY; Octo X, Octo I, Octo V - Multiple Flight Control Modes/Intelligent Switching: three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. - GPS Module Available/Accurate Position Hold: (optional) plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical. - Intelligent Orientation Control: Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction - Enhanced Failsafe Mode: sticks from controller will go to center position. If the GPS module is used, you can also set RTH on failsafe - Two Levels of Low Voltage Protections: LED warning. The first level will blink the red light continuously; the second level will blink red light continuously and the multi-rotor will descend and land - Motor Arm and Motor Dis-arm: There are four ways to start the motors, see manual. - PPM, S-BUS & Ordinary Receiver Supported: Minimum Four channel receiver supported, installation quick and easy, not easy to make mistakes. - Independent LED Module: indication of the flight status, through the LED flashing frequency and colour .The pilot can get information more quickly and more conveniently, even at night. The Led module has a USB interface, which is used for parameter settings and firmware upgrade. - Built-in Gimbal Stabilization Function: is compatible with almost all 2-axis gimbal systems. - Multi-rotor One-power Output Fail Protection. - Remote Gain Adjustment: adjustment by using a control slider on the TX during flight, in order to obtain better performance. - New Assistant Software & Firmware Online Update: The logical design makes your parameter settings more simple and convenient. Like other DJI products the Naza-M V2 firmware can be upgraded free online.
TECH.SPEC:
Basic Performance |
Supported Multi-rotor |
Supported ESC output |
Recommended Transmitter |
Working Voltage Range |
Quad-rotor I4, X4 Hex-rotor I6, X6, IY6, Y6 Octo-rotor I8,V8,X8 |
400Hz refresh frequency |
PCM or 2.4GHz with minimum 4 channels |
MC:4.8V~5.5V VU Input: 7.4V ~ 26.0 V (recommend 2S ~ 6S LiPo) Output(V-SEN port red wire): 3A@5V (burst current:7.5A) |
Power Consumption |
Operating Temperature |
Assistant Software System Requirement |
|
MAX: 3.15W(0.25A@12.6V) Normal:1.638W(0.13A@12.6V) |
-10°C ~ 50°C |
Windows XP sp3 / Windows 7 / Windows 8 |
|
Flight Performance |
Hovering Accuracy (GPS Mode) |
Max Yaw Angular Velocity |
Max Tilt Angle |
Ascent / Descent |
Vertical:±0.8m Horizontal:±2.5m |
200°/s |
35° |
6m/s,4.5m/s |
Hardware |
Weight |
Dimensions |
Built-In Functions |
|
MC:27g PMU:28g GPS:27g LED:13g |
MC: 45.5mm x 32.5mm x 18.5mm PMU: 39.5mm x 27.5mm x 10.0mm GPS & Compass 46mm(diameter)x10mm LED: 25mm x 25mm x 7.0mm |
Multiple Autopilot Control Mode Enhanced Fail-safe Low Voltage Protection S-Bus Receiver Support PPM Receiver Support Independent PMU Module 2-axle Gimbal Support |
|
Notice:Flight Performance can be effected by mechanical performance and payloads
• Videos
|