DJI D-Bus Adapter for A2 Flight Controller
The DJI D-BUS ADAPTER module can provide eight-way input or output for the A2 Multirotor Flight Controller. A traditional receiver can be used through this module, or can be used to extend the output ports. Please refer to the A2 user manual D-BUS ADAPTER section for more specific details of functionality. When using a traditional D-BUS receiver with the A2, the DJI D-BUS Adapter is required.
D-BUS Adapter Setup:
- Put the switch to the “I” stop, and power on the system. The LED should be on red; otherwise keep the switch at the “I” stop and then power cycle the system.
- At the “I” stop, the D-BUS Adapter is converting the PWM signal from traditional receiver to S-BUS signal.
More info about the A2 Flight Controller:
Superseding the Wookong family, the A2 sticks closely to the DJI’s tradition of wowing customers with high specs, but it also innovates dramatically in Position Hold in Extreme Environments, High Accuracy and Anti-vibration Dampening Characteristics, a Built-in 2.4ghz DESST Receiver and more.