COMPATIBILITY WITH DJI INSPIRE 1 & INSPIRE 2
The company ElectronicaRC represents Inspire 1 and Inspire 2 Cable Cam V.2. A ropeway for shooting in the movement. We tried to make the best product for the most experienced operators.
Install your Innspire 1, only 2 minutes and now control your Inspire 1 camera, X3, X5, X5R (RAW). You can see the imagen to record in your SmartPhone or Tablet.
IMPROVEMENTS Version 2
- Engine 2000W (2.5 times more powerful)
- Lightweight and resistant chassis made of Fiberglass G10
- New ESC with sinuidal wave that improves control Speed
- Matte black finish with a professional finish.
Inspire 1 Cable Cam V.2:
1. The compact size for a Inspire 1 Cable Cam – has the smallest dimensions posible without loss of speed of movement and payload for any gimbal
2. Easy installation – Pull a rope, install Inspire 1 Cable Cam to the rope and begin shooting. It is more than any keys and screw-drivers for installation it won’t be required.
3. New speed control – This new controller will give a more precise movement to your recordings
4. Movement speed – Inspire 1 Cable Cam V.2 is equipped with new powerful brushless motors, 2000W, that allows it to gather speed between 0.8 to 60 km/h.
- Weight: 2.25 Kg.
- Dimension: 890 mm.
DJI Inspire Cable Cam V.2 RTF with motor and electronic.
You will need:
- Inspire 1 with Camera
- Rope: 8mm
- Battery 4S 5500 mAh and Charger. (if you want higher speed you have to use a 6S battery)
- Transmitter and Receiver R/C
Note: Inspire 1, Inspire 2, Camera, Gimbal, Battery, Rope, receiver not included.
Ronin Cable Cam V.1 with otional accesories not included
Select your accessories (200meters 8mm Rope with tensor, 14.8V 4S Baterry 5300 mAh).Choose below.
|Chager + Battery:
|Rope with Tensor: