New funtion in EASY OSD V3.70:
- Current Sensor 50Amp.
- More Compact size 26x45mm
- Improved compatibility with NTSC camera
- Support distance unit in meter /km and feet/ML, speed at Kmh /mph
- 10Hz GPS
Easy OSD V3.70 with 10Hz GPS (On Screen Display) and 50Amp. Sensor Currect for RC FPV (First Person View flight). Overlays the GPS information and other information on the video image. Easy OSD it´s really fast to install and high quality graphics, use a Maxim. The graphics painted on the video image can be read in any lighting condition. It´s great!!!
When flying FPV one of the fears is disoriented and lost. Well, with this OSD this does not happen, indicates by graphs the way to came back to the point of departure. If you are starting in FPV it is your OSD!!!
Easy Programming: includes board with push button for setting the parameters, the easiest and intuitive way . Forget the radio RC or the computer to programing like other OSD.
Shows other important parameters during the flight:
- Altitude of the model
- Speed of the model
- Current sensor
- GPS coordinates
- Position on Track
- Indicator for comint home (RTH)
- Distance Track
- Distance traveled
- The main battery voltage
- Flight time
- Satellites found
- RSSI (signal quality receiver)
- unit mode for meter/KM or feet/mile
1x Easy OSD V3.70
1x GPS 10Hz (pre-installed connectors)
1x 50 Amp Current sensor (with out connector)
1x Board programing
Cables needed for installation
Easy OSD includes all necessary cables for easy installation does not need to make any complicated adjustment or programming, only install on any FPV model
Weight: 10 gr.
Size: 45x25 mm.
OSD LED Ligh signal indication:
LED ALWAYS ON: ---- Waiting for satellite signal
LED Short flash --- Can not find the GPS connection. (off for 0.2second )
LED flashing once a second --- OSD/GPS working good.(on/off for a second)
Jumper setting for 5V output to Transmitter