Favourite Little bee 30A 2-6S ESC (No BEC)
In mini quads every gram counts. The LittleBee is a good quality, small and lightweight ESC.
LittleBee is using a Silabs processor and fast dedicated driver chips. It comes flashed with BLHei Firmware utilizing Oneshot125 communication protocol making it fast and responsive to throttle movements.
This will help keep your weight down.
• Small size
• Preflashed with BLHeli Firmware (V14.2)
• Silabs F390 MCU
• 2-6s LiPoly
• OPTO ESC
Input: 2-6s LiPoly
Constant: 30 Amps
Burst: 40 Amps
BEC: No BEC, opto only
MCU: Silabs F390
Weight: 12g (with wires)
Note: this is an OPTO ESC so you will need a 5V BEC to power your flight controller.
Specs and Features of the Little Bee 30a Esc
Oneshot125 is a different and faster communication protocol between the flight controller and the ESC on your quadcopter. It allows the FC to send control commands to the motor quicker, therefore in theory your multirotor should perform better.
This feature allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.
With the BLHELI software rapidly evolving, you can flash the lastest firmware using the 3pin connector and suitable USB adapter and now can be used via the cleanflight GUI please note you will need to be running the Betaflight firmware to connect via the cleanflight interface but this is a simple way of adjusting and tweaking the settings of your escs.
Important notice! ESC's are not protected against reverse polarity. Doing so will almost certainly cause irreparable damage. These products are sold as components. Multirotorparts is not responsable for defects caused by improper use.