FeiYu G3 Mini 3D PRO (3 axis) 360º Panning VERSION FLIR THERMAL CAMMERAS
THIS GIMBAL IS COMPATIBLE WITH FOLLOWING FLIR THERMAL CAMERAS:
- Flir Vue 320 and Flir Vue 640
- Flir Vue Pro 320 and Flir Vue Pro 640
- Flir Vue Pro R 320 and Flir Vue Pro R 640
- This gimbal will power your flir camera and output video from the camera to the video transmitter.
- This gimbal have 360º continuos rotattion on Yaw axis and will have output connector to allow pitch, yaw and mode control from video receiver. Also have video output from camara in this conector.
- MiNi 3D PRO 3-Axis Brushless Gimbal ( For aircraft ) suitable for Flir Vue, Vue Pro and Vue Pro R cameras.
- 360 degrees Panning
- Can be easily mounted in fixed wing, multirotor, helicopter for aerial photography, and can work independently only need power supply.
- There is no need to set up and adjust the parameter.
- For the first use, power on the Gimbal, and then keep it static for a while, after its reset, the gimbal will be in a level position automatically. Then you can use it normally.
- You can reverse it and upward install on a fixed wing aircraft
- You can install on vertical
When connect to RC receiver it can switch in 3 working modes, also can control the heading and pitch via the RC receiver.
● Heading Follow Mode —— Camera Pitch and Roll angles remain constant, heading follows the nose position,pitch can be control by RC
● Heading And Pitch Follow Mode ——Camera Roll angle remains constant. Heading follow the nose position and Pitch follow the elevation of the aircreft.
● Heading Lock Mode ——Heading, Pitch and Roll are all locked to point at one position. Heading and pitch can be control by RC .
Mini 3D Pro 3-Axis Brushless Gimbal
Optimize on the basis of MINI3D more powerful,with better performance
Continuous updating brings deep optimization
360 degrees panning control enables gorgeous scenery to be fully realized
The core technology, taking the lead every step
Magnetic encoder obtains accurate perception attitude changes in each motor
-With advanced motor driver program, sinusoidal wave outputs smoothly and steadily
-With single sensor, it can accurately sense the position relations of the three motors
-With seemless switching axis technique, it brings more smooth operation experience.
-With interior limit, can move orderly avoiding wire coiling
Born with powerful compatibility
- Suitable For Gopro4 / Gopro3+/Gopro3 or the cameras with the similar size(41mmx59mmx21mm, extra LCD is compatible)
- Work with Multirotor, fixed wing and helicopters and other aircraft, including DJI phantom.
Born for X-sports demand give you ultimate experience
Adopt latest FY intelligent solution Work once power on without complicated debugging, compatible with many types of the aircraft.
Quick installation,easy to use
New design improves the ease of assembly
Exquisite technology, fine processing
Aviation aluminum, anodic oxidation, CNC cutting, match the smartphones processing technology.
Material upgrade, leading technology
Structured with all metal material brings extreme stabilization experience, combined with strong rigidity in both hardware and software makes the best stabilizer ever. A variety of of working mode, but all the control is at your finger tips
Multiple modes, switching freely
Three work modes, arbitrary switching capture every wonderful moment.
Camera is permitted to pan left or right. Vertical tilts or rolls are restricted.
Panning and Tilting Mode
Camera is permitted to pan left or right and tilt up and down. Rolls are restricted.
Camera stays in its current orientation. All panning, tilting and rolls are restricted.
Three kinds of installation
Three kinds of installation,can cut randomly,and meet all your requirment