This model has been designed especially for FPV (First Person View) flying!
This is a true FPV plane that is easy to build and comes packed with common sense FPV must-haves features. The rear mounted elevator and rudder servos help counter balance additional FPV and radio equipment. Other practical features include the large internal ply mounting trays for installing batteries, transmitters and other FPV equipment while still allowing easy configuration for achieving correct C of G. The large canopy area allows for an aray of camera equipment and is not mounted to the frame allowing you to configure your model as you require.
This is a hand-launch model which allows for launching in any terrain. The combination of a large wing, and the recommended 4s power train, means there will be plenty of power and lift for the initial launch. The fiberglass fuselage is ultra tough and ideally shaped for landing on grass, with a flat bottom and rear skid.
Material: Fiberglass & Ply/Balsa
Wing Span: 1669mm (65.7")
Wing Area: 34.3" dm2
Fuselage: 1181mm (46.5")
Motor Mount Diameter: 58mm
Distance From Center of Mount to Fuse: 114mm (max prop diameter 8"]
Flying Weight: 2300g
Minimum 4 Channel, 4 x Mini servo
Motor: 35 to 42 series Outrunner
ESC: 40A to 60A
Servo: 4 x 9g~14g
Battery: 4s 2200mah~4400mah