  5,8GHz ImmersionRC Duo5800 v4.1 A/V Diversity Receiver 40CH Race Band
5.8GHz A/V Diversity Receiver is CE certified. Groundstation Link, NexWaveRF, Triple Output, 40 channel... Version 4.1
ImmersionRC's newest version (4.1) of their popular 5.8GHz diversity receiver, the DUO5800 V4 now with 40ch including RaceBand. This receiver includes the popular Fatshark/ImmersionRC 'NexWaveRF' series of A/V frequencies + 7 RaceBand channels and now also includes an additional 24ch for 5.8GHz. Now 1 receiver can cover all 5.8GHz frequencies. The diversity receiver system automatically chooses the best signal reception between the two internal receivers, giving you the best picture possible.
Supplied with:
2 x antennas (3dBi 5.8Ghz omni-directional), SMA male connector
2 x 30cm RCA AV cables (3.5mm 4-POL to 3xCinch)
1 x 1m DC Power cable (open ends
ImmersionRC DUO5800 5.8GHz Receiver Race Edition
- >-90dBm typical sensitivity, NexWaveRF module technology
- Standard Frequencies : IRC/FatShark: 5740, 5760, 5780, 5800, 5820, 5840, 5860 (all within the legal ISM band) IRC RaceBand: 5685, 5695, 5732, 5769, 5806, 5843, 5880, 5917 MHz (legal for Ham use in USA)
- Extra frequencies :
E Band: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945 B Band: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866 A Band: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
-A/V receiver with diversity antenna inputs -GS-Link (Groundstation Link) for direct single-cable connection to the ImmersionRC Groundstation (soon to be released) - >-90dBm typical sensitivity (using NexWaveRF module technology) -SMA female antenna connectors, compatible with standard 5.8GHz antennas (omni or directional) - Compatible with 'DC Short' antennas (such as the Cloverleaf, and SPW) like: Spironet -Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz as standard, with 32 channel mode supporting most competitor's transmitters. -Audible Low-battery alarm, Duo5800v4 uses a switching regulator for lower power consumption, and runs much cooler -Inputs filtered against nearby 2.4GHz and UHF R/C radios. -Input voltage 6-16V DC (2.1mm plug, center pin positive)
Download the User Manual - Duo5800 User’s Guide (EN) (1.8 MB)



|