Infrared Photo/Video Mode Switch for Sony NEX-5N/ NEX-5R/ NEX-7 Cameras
Switch your camera between photo mode and video recording mode using your transmitter (using a 3-position switch).
You can also control start and stop recording under video mode.
* Your camera should be set to IR control mode when use this device.
Infrared Shutter Remote Controller Photo/Video for Sony Cameras
Dimension: 20 x 10 x 3mm
Let's mark the 3 positions of the switch channel of your transmitter using position 1, 2 and 3, when the switch is set to position 2 (middle position) then camera stop working, when switch is set to position 1 or 3, then the camera will work in continuous photographing mode or video recording mode, video recording will start 2 seconds after the switch is turned to the video mode position.
If position 3 is for video recording, to stop recording, you can turn the switch back to position 1, now the video recording will not stop, then you can move the switch to position 2 (middle position), then video recording will now stop.
Hint: For WFLY transmitter, no setting is needed for the 3 band switch, if you use Futaba T8FG/10C/12FG714FG transmitter, you need to set the "END POINT" parameters to"135, 100, 110, 135"
1 x Remote infrared shutter Photo/Video controller for Sony NEX-5N/ NEX-5R/NEX/7 Cameras
1 x Cable servo extension male-male