EASY FPV BOARD, FOR FREE


FPV long range video (bettwen 20 Km. with optional 8 dBi antenna Patch. With standar 3 dBi antennas 7-10 Km) 8 Channel 1,3Ghz Receiver and Transmitter with digital display channel, many working channels. For FPV/UAV model airplane video transmitter.

- Greater range for the same power that 2.4 Ghz video equipments.
- Can use this equipment with 2.4 Ghz RC transmiter.
- This band it's less saturated. You won't get interference from bluetooh, wifi, or 2.4Ghz RC transmitter.

News Tx V.2 1.3Ghz 1500mW :

■ New output to change the video channel in-flight. Useful if you suddenly find a interference from another transmitter on the same channel.
■ High-power, up to 1700 mW in the channel from 1320 to 1360 MHz. Improving the quality of video link
■ Bigger, better cooling and 5 gr. more weight

Package Including:

1 x 8 Channel, RSSI Receiver Digital Display. With RSSI conector instaled, NEW!!! (Optional)
1 x 1.5W V.2 Transmitter 8 Ch. Digital Display
2 x 3 dBi dipole antennas (omnidireccional)
1 x Easy FPV Board
2 x Transmitter connecting cable
1 x Video/audio cable
1 x 2,1mm power connector

 

 
Receiver with RSSI conector instaled , NEW!!! (Optional) 

Features Receiver:

- 1,2 & 1,3 GHz audio/video receiver
- RSSI connector (jack 3.5mm)
- 8 channel operation ( PLL) (1.080 - 1.120 - 1.160 - 1.200 - 1.240 - 1.280 - 1.320 - 1.360 Ghz) with Digital display.
- Antenna conector: SMA
- Voltage: 7-12V DC (positive center pin)
- Output Current: 245 mA
- RSSI out: 0-5V (Optional)
5V= low RSSI signal
0V= stronger RSSI
You can use a 3.5mm headphone cable to connect to the RSSI output.

Features Transmitter:

- 1,2 & 1,3 Ghz audio/video transmitter
- 1500mW RF output power
- 8 channel operation ( PLL) (1.080 - 1.120 - 1.160 - 1.200 - 1.240 - 1.280 - 1.320 - 1.360 Ghz) with Digital display.
- Voltage: 12V DC
- Output Current: 410 mA
- SMA antenna 3dBi (included)
- Size: 72 x 43 x 13mm.
- Weight: 80 gr.

   

-The transmitter has 1 connector (down) with 4 connections wires:

* Red: Power 12V (+/- 10%)<
* Black: GND
* Yellow: Video in
* White: Audio in

-The transmitter has 1 connector (up) with 4 connections wires:

* Red: OUT 12V br> * Black: GND
* Yellow: R/C
* White: no used

it is recommended to place the transmitter in an airflow.