Inicio My Account  Cart Contents  Checkout  
  Top » Catalog » DJI Innovations Products » Ronin & Focus » Ronin M My Account  |  Cart Contents  |  Checkout   
Categories
 ROV Dron Under Water
 Sales DJI
 DJI Innovations Products   DJI Goggles    DJI Promotion    Tello    Mavic Mini    Spark    Mavic 2    Mavic 2 Enterprise    Mavic AIR    Mavic Pro & Platinum    Phantom 4 Advanced    Phantom 4 RTK    Phantom 4 Pro    Phantom 4 Pro Obsidian    Phantom 3    Inspire 1    Inspire 2    Matrice 600 / 100 / Guidance    Matrice 200 / 210 / 210 RTK    CrystalSky    DJI Wind Series    Osmo    Osmo Pocket    Ronin & Focus    S1000, S900, S800    F450 / F550    A3 / A2 / N3 / Naza    LightBridge 2    Telemetry & Video    Power Systems    Z15 / H33D / H43D    Phantom 1 & 2    DJI Care
 Multicopter   Multicopter Combo (RTF)    Frame Multirotor    Flight Controller    Brushless Motors    Speed Control (ESC)    Proppeller    Landing Gear    Fly Simulator    Flight Case    Accessories    Fiber, Carbon, tube,..
 Parachutes
 Gimbal   Frame & Parts    Gimbal Combo    Gimbal RTF    Electronic    GMB Motors    Gimbal with servos
 Micro Dron   FatShark Video Goggles    Micro BackPack    Micro Battery    Micro ESC    Micro Flight Control    Micro Frames    Micro Motor    Micro Power Set    Micro Proppeller    ImmersionRC Vortex 285    ImmersionRC Vortex 250    Micro accesories    Tramp HV 5.8Ghz
 Connex HD Video DownLink
 Thermal & Multispectral Cammeras
 Cable Cam
 FPV/RPV & UAVīs   FatShark Goggles    FatShark Accessories    Video Monitor    Camera    Video Tx & Rx    Set FPV    OSD / AutoPilot    Telemetry-GPS    Antenna    Antenna Tracking Systems    433Mhz Long Range    Pan & Tilt / HT    Plane Cockpit    Accessories
 R/C Products   Plane    Chargers    RC Transmitter & Rx    Servos    Motor / ESC / Prop    Electronic Circuit    Conectors & Adapters    Wire    Heat Shrink Tubing    Fly Simulator    Hardware    Tools
 Lipo Baterys   Bateries RC TX    Lipo Batteries 2S    Lipo Batteries 3S    Lipo Batteries 4S    Lipo Batteries 6S    Connectors    Lipo accesories
 Li-Ion Battery   Single Cells    Li-Ion Battery 3S    Li-Ion Battery 4S    Li-Ion 8S Battery    Li-Ion Battery 6S
 UgCS Software
 Droens Services
 Flight Case
 RPA Pilot Course (Drones)
 Clearance
 Sale
Ronin M DJI + Extra Gift Battery
[Ronin M]
1,159.00EUR 1,059.00EUR




 

RONIN M + Extra Gift Battery

2 Batteries includes

 Now IN STOCK,
Free Worldwide Shipping
ElectronicaRC are official Dealers for Dji in SPAIN.
   




Product Highlights

  • Supports Cameras up to 8 Pounds
  • Precision of Control: ±0.02°
  • Transmitter for Remote Pan/Tilt Control
  • Tool-Less Balance Adjustment System
  • Assistant Software for iOS and Windows
  • Bluetooth Wireless Interface for Setup
  • Silent Mode For Quiet Operation
  • USB and PowerTap Power Outputs


The Ronin-M 3-Axis Handheld Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 8 pounds, the Ronin-M uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. The system is computer-controlled and features a tilt range of 105⁰ up / 165⁰ down plus a roll range of ±110⁰. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.

The Ronin-M supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin-M itself moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin-M to install your own receiver.

As with sled and vest style stabilizers, motorized gimbal systems require balancing before use. Once balanced, you can configure the Ronin-M for your particular camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. Because every camera and lens combination has a different mass and weight distribution, there is an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned. A gimbal tuning stand is provided so you won't have to hand-hold the rig during this process.

The included 4S lithium-polymer battery powers the Ronin-M for up to six hours. It is a "smart" battery, meaning power regulation and protection circuitry is built-in and there is no separate balancing lead, unlike many lithium-polymer batteries. A charger is also included, and it is important to always use chargers designed for the Ronin-M battery because of the smart circuitry. Two 12V DC PowerTaps and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin-M battery to simplify your charging regime and avoid unnecessary added weight.

For Cameras Up to 8 lb
The Auto Configuration feature means the Ronin-M can adapt to a range of camera sizes, and is ideally suited for compact video cameras, mirrorless cameras, and DSLRs. It is suitable for payloads up to 8 pounds.
SmoothTrack Control
SmoothTrack gives a single gimbal operator the ability to translate their tilt and pan movements of the gimbal into smooth and stabilized movements of the camera's angle. This is designed to make framing of broad wide-angle scenes or even shooting in close quarters much easier during single gimbal operator use.
Auto Configuration
After balancing the camera with a simple tap of the ATS (Auto Tune Stability) button, Ronin-M will be automatically tuned for the mass and weight distribution of your camera rig. The gimbal will intelligently adjust parameters based on the camera rig's weight and independently adjust each of the three axes until an optimal setting is found.
Three Operation Modes
Upright Operation Mode
Upright Mode allows the gimbal to be flipped over so the camera can be operated closer to eye level without straining to lift the gimbal. This can be used in various situations, such mounting on the top of the vehicle.

Underslung (Suspended) Operation Mode
Suspended Operation Mode is the standard operation mode for Ronin-M. Low slung, close to the ground, or simply holding the gimbal in front of you offers stabilized handheld footage. This mode would also be used when mounted the gimbal on a flying platform such as a multirotor RC helicopter.

Briefcase Mode
When a slimmer gimbal profile is needed - such as when moving through doorways or narrow paths - Briefcase Mode is ideal. It allows the gimbal to be held to the side and close to the legs, much like a briefcase.
Second Operator Control
Featuring the form factor of an RC aircraft radio controller, the 2.4 GHz Ronin transmitter provides pan and tilt control as well user-assignable speed settings and operation modes via two toggle switches. This allows one operator to hold the gimbal assembly while a second manually controls camera movement remotely. If you would rather use a third-party transmitter a D-bus port is provided as well.
Optional Thumb Controller for Pan / Tilt
Single thumb control is possible for the Ronin-M Handheld Gimbal System. These Pan and Tilt movements are controlled via the optional Thumb Controller attachment, available separately. Additionally, SmoothTrack Mode can be turned on or off using the Thumb Controller interface.
Assistant Software for Mobile and Windows
A mobile device or computer to run the Assistant Software is essential. It is available for select iOS mobile devices and Windows computers. With the software you can:
  • Auto Configure the rig based on the weight and weight distribution of your camera after you've balanced it
  • Adjust Smoothtrack tuning to user preference
  • Enable and configure Second Operator Control
  • Run diagnostics and generate stats
  • Install firmware updates

 

 

The software can interface via USB or wirelessly over Bluetooth

Tool-Free Adjustment
A built-in balance adjustment system means no tools are needed for setup and adjustment, saving time when changing the setup for different camera arrangements.
Universal Mounting
Beside the handle bars, the gimbal unit can be detached for mounting on jibs, cranes, tripods, vehicle mounts, and other types of camera support equipment (additional mounting hardware, available separately, may be required).
Solid Support Arm
Increased rigidity is provided by a single, complete piece of fine-tooled magnesium that forms the U-shaped arm holding the camera plate. This unified design helps eliminate imperfection common in systems made of multiple pieces assembled together. The arm gives you not only greater stability but also reliability, as there is no potential for separate pieces to come loose or move apart
Silent Mode
When shooting indoors or in tight spaces, Silent Mode reduces the sound of each motor as low as possible. The Ronin-M's stabilization algorithms are updated to focus on minute changes and stabilization, helping ensure the sound of the motors is not recorded by sensitive microphones or other recording equipment
Quick Release Smart Battery
Providing an estimated 6 hours of run time (depending on use), the proprietary Ronin-M battery system is designed for easy changes in the field and charges using a dedicated charger that is included. The batteries feature indicators so remaining power can be checked directly on the battery itself. Unlike may lithium-polymer batteries, with the Ronin-M Smart Battery, overcharge and over depletion protection is built-in, as is individual battery cell charge balancing.
Power Distribution Box
Two regulated 12V DC PowerTaps, one 500 mAh type A female USB connector, and also a connection point for the DJI Lightbridge Long Range HD Video Downlink are provided. These provide power connection for various accessories, including motorized follow focus systems, video transmitters, and more - all while keeping the wiring to a minimum.
Quick Release Top Handle
Designed to save time breaking the system down or transporting it between locations. Removing the handle bars can also be useful to reduce size when filming in tight locations.
Based on Zenmuse Technology
The Ronin-M adapts the same brushless motor technology used in DJI's aerial gimbals for handheld, terrestrial use.

INCLUDE IN  THE BOX

DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
  • Ronin-M Transmitter (Controller)
  • Ronin-M 4S 1580 mAh Battery
  • Battery Charger
  • Handle Bar
  • Turning Stand
  • Cable Pack
  • Micro-USB Cable
  • Camera Mounting Plate
  • 2 x Camera Screw A (1/4"-20)
  • 2 x Camera Screw B (3/8"-16)
  • 2 x Camera Screw C (1/4"-20)
  • 2 x Camera Screw D (3/8"-16)
  • Lens Support Screw
  • Lens Support
  • 3 x Allen Wrenches



  • Performance
    Load Weight (Reference Value) 8 lb / 3.6 kg
    Angular Vibration Range ±0.02°
    Maximum Controlled Rotation Speed Pan Axis: 90°/s
    Tilt Axis: 100°/s
    Roll Axis: 30°/s
    Mechanical Endpoint Range Pan Axis Control: 360°/s
    Tilt Axis Control: +105° /-165°/s
    Roll Axis Control: ± 110°/s
    Controlled Rotation Range Pan Axis Control: 360°/s
    Tilt Axis Control: +105° /-165°/s
    Roll Axis Control: ± 25°/s
    Electrical and Mechanical
    Motor Type 3 x Brushless
    Working Current Static Current: 300 mA (at 16 VDC)
    Dynamic Current: 600 mA (at 16 VDC)
    Locked Motor Current: 10 A maximum (at 16 VDC)
    Sensors Independent IMU module
    Temperature sensor
    Processing 32-bit DSP processor
    Receiver
    Frequency 2.4 GHz
    Expandability D-Bus receiver supported
    Connectivity
    Wireless 2.4 GHz for transmitter (remote controller)
    Bluetooth 4.0
    Wired 2 x 12 VDC regulated PowerTap
    1 x USB power output (500 mW)
    1 x DJI Lightbridge interface
    System Requirements
    Assistant Software Desktop: Windows (32- or 64-bit): 8, 7, XP SP3
    Mac OS X: 10.9 or above

    Mobile:
    iOS 7.0 or later
    General
    Control Modes Underslung Mode
    Upright Mode
    Briefcase Mode
    Supported Camera Dimensions Maximum depth at center of mass on camera base plate: 4.7" / 120 mm
    Maximum height measured from top of camera base plate: 7.7" / 195 mm
    Maximum width: 6.3" / 160 mm
    Power Requirements 4S Ronin-M Battery
    Operating Temperature -5 to 122°F / -15 to 50°C
    Dimensions (W x D x H) 19.7 x 8.3 x 16.5" / 500 x 210 x 420 mm
    Weight 5.07 lb / 2.3 kg (fully loaded with handlebar)

    This product was added to our catalog on Monday 12 December, 2016.
    Reviews
    Customers who bought this product also purchased
    RODE VideoMicro & Osmo - Quick Release 360° Mic Mount (Part 45)
    RODE VideoMicro & Osmo - Quick Release 360° Mic Mount (Part 45)
    <b> Ronin MX + Wireless Thumb controle & Grip for Free</b>
    Ronin MX + Wireless Thumb controle & Grip for Free
    Osmo - Quad Charging System (Adapter Excluded) Part 58
    Osmo - Quad Charging System (Adapter Excluded) Part 58
    <b> Osmo Mobile 2 </b> In Stock!!!
    Osmo Mobile 2 In Stock!!!
    DJI Ronin M Battery 4S <b> 1580 mAh </b>
    DJI Ronin M Battery 4S 1580 mAh
    <b> DJI Ronin-M Suitcase </b>
    DJI Ronin-M Suitcase
    Shopping Cart more
    0 items
    Manufacturer Info
    DJI Homepage
    Other products
    Notifications more
    NotificationsNotify me of updates to Ronin M DJI + Extra Gift Battery
    Quick Find
     
    Use keywords to find the product you are looking for.
    Advanced Search
    Tell A Friend
     
    Tell someone you know about this product.
    What's New? more
    DJI Osmo Pocket - Expansion Kit
    DJI Osmo Pocket - Expansion Kit
    109.00EUR
    Manufacturers
    Languages
    English Espaņol
    Currencies
    Information
    Financing
    Shipping & Payment
    Privacy
    Conditions
    Contact us
    Site Map
    RMA (Returns to SAT)

    Copyright © 2019 ElectronicaRC.com
    Powered by osCommerce

    Shipping