Inicio My Account  Cart Contents  Checkout  
  Top » Catalog » R/C Products » Chargers » SkyRC 6X80+ My Account  |  Cart Contents  |  Checkout   
Categories
 ROV Dron Under Water
 Sales DJI
 DJI Innovations Products   DJI Goggles    DJI Promotion    Tello    Spark    Mavic 2    Mavic 2 Enterprise    Mavic AIR    Mavic Pro & Platinum    Phantom 4 Advanced    Phantom 4 RTK    Phantom 4 Pro    Phantom 4 Pro Obsidian    Phantom 3    Inspire 1    Inspire 2    Matrice 600 / 100 / Guidance    Matrice 200 / 210 / 210 RTK    CrystalSky    DJI Wind Series    Osmo    Osmo Pocket    Ronin & Focus    S1000, S900, S800    F450 / F550    A3 / A2 / N3 / Naza    LightBridge 2    Telemetry & Video    Power Systems    Z15 / H33D / H43D    Phantom 1 & 2    DJI Care
 Multicopter   Multicopter Combo (RTF)    Frame Multirotor    Flight Controller    Brushless Motors    Speed Control (ESC)    Proppeller    Landing Gear    Fly Simulator    Flight Case    Accessories    Fiber, Carbon, tube,..
 Parachutes
 Gimbal   Frame & Parts    Gimbal Combo    Gimbal RTF    Electronic    GMB Motors    Gimbal with servos
 Micro Dron   FatShark Video Goggles    Micro BackPack    Micro Battery    Micro ESC    Micro Flight Control    Micro Frames    Micro Motor    Micro Power Set    Micro Proppeller    ImmersionRC Vortex 285    ImmersionRC Vortex 250    Micro accesories    Tramp HV 5.8Ghz
 Connex HD Video DownLink
 Thermal & Multispectral Cammeras
 Cable Cam
 FPV/RPV & UAVīs   FatShark Goggles    FatShark Accessories    Video Monitor    Camera    Video Tx & Rx    Set FPV    OSD / AutoPilot    Telemetry-GPS    Antenna    Antenna Tracking Systems    433Mhz Long Range    Pan & Tilt / HT    Plane Cockpit    Accessories
 R/C Products   Plane    Chargers    RC Transmitter & Rx    Servos    Motor / ESC / Prop    Electronic Circuit    Conectors & Adapters    Wire    Heat Shrink Tubing    Fly Simulator    Hardware    Tools
 Lipo Baterys   Bateries RC TX    Lipo Batteries 2S    Lipo Batteries 3S    Lipo Batteries 4S    Lipo Batteries 6S    Connectors    Lipo accesories
 Li-Ion Battery   Single Cells    Li-Ion Battery 3S    Li-Ion Battery 4S    Li-Ion 8S Battery    Li-Ion Battery 6S
 UgCS Software
 Droens Services
 Flight Case
 RPA Pilot Course (Drones)
 Clearance
 Sale
SKYRC 6X80+ BLUE VERSION AC/DC (12/220V)
[SkyRC 6X80+]
79.00EUR




 

SKYRC 6X80+ BLUE VERSION 12/220V

APPS for Smart Phone (both iOS and Android)
 Finally, your charger gets its own apps. This charger can be controlled and operated by smart phones.

 

Optimized Operating Software
 
SKYRC 6x80 Plus features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!

Internal Independent Lithium Battery Balancer
 
SKYRC 6x80 Plus employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.

Balancing Individual Cells Battery Discharging
During the process of discharging, SKYRC 6x80 Plus can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.

Adaptable to Various Type of Lithium Battery
SKYRC 6x80 Plus is adaptable to various types of lithium batteries, such as LiPo, LiIon and the new LiFe series of batteries.

Fast and Storage Mode of Lithium Battery
Purposes to charge lithium battery varies, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.

Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge > charge is operable for battery refreshing and balancing to stimulate the battery's activity. 

Data Store/Load
The charger can store up to 10 different charge/discharge profiles for your convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.

Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. 

Lipo Battery Meter
 
The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage.

Motor RPM Tester
  Users connect the sensor motor and charger with sensor wire, set the pulse width and test the RPM of the motor.

Servo Tester
  Connect the servo and the charger with wire, change the pulse width value and check whether the servo works or not.

Re-Peak Mode of NiMH/NiCd Battery
 
In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically. This is good for making certain the battery is fully charged, and for checking how well the battery receives fast charges.

Delta-peak Sensitivity for NiMH/NiCd
 
Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.

Automatic Charging Current Limit
  You can set up the upper limit of the charging current when charging your NiMH or NiCd battery, it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.

Capacity Limit
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.

Temperature Threshold*
 
The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.

Processing Time Limit:
 
You can also limit the maximum process time to avoid any possible defect.

PC Control Software “Charge Master”
The free “Charge Master” software gives you unparalleled ability to operate the charger through the computer. You can monitor pack voltage, cell voltage and other data during the charging, view charge date in real-time graphs. And you can initiate, control charging and update firmware from “Charge Master”.

APPS for Smart Phone (both iOS and Android)
 Finally, your charger gets its own apps. This charger can be controlled and operated by smart phones.

 

Input Voltage: AC Input: 100-240V /DC Input: 11-18V

Controls: Enter/Start Rotary Dial, Mode/Stop Button

Bluetooth: Available

Display Type: 63.40*14.54mm LCD screen

Display Backlight: Blue

PC Communications: USB Port for PC Control & Firmware Upgrade

Case Material: Plastic

Cooling System: Bult-in, one 30*30*7mm fan

Case Size: 135*112*60.9mm

Weight: 525g

External Port: Temp Sensor, Servo/ESC Port, Brushless Motor Sensor Port, AC Input Power Port, Balance Socket,

                       USB Port for PC

Delta Peak Detection: NiCd: 3-15mV/cell

                                   NiMH: 3-15mV/cell

Trickle Charge: 50-300mA

Charge Cutoff Temperature: 20-80°C (adjustable)

Charge Voltage: NiCd/NiMH: Delta peak detection

                          LiPo: 4.18-4.3V/cell

                          LiIon: 4.08-4.2V/cell

                          LiFe: 3.58-3.7V/cell

Balance Current: 200mA/cell

Reading Voltage Range: 0.3-5.0V/cell

Battery Types/Cells: NiCd/NiMH: 1-15cells

                                LiPo/LiIon/LiFe: 1-6cells

                                Pb: 2-20V

Battery Capacity Range: NiCd/NiMH: 0.1-1.1V/cell

                                       LiPo/LiIon/LiFe: 100-50,000mAh

                                       Pb: 100-50,000mAh

Charge Current: 0.1-10.0A

Safety Timer: 1-720 minutes, Off

Charge Wattage: AC50W, DC80W

Discharge Current: 0.1-5.0A(±10%)

Discharge Cut-off Voltage: NiCd/NiMH: 0.1-1.1V/cell

                                          LiPo: 3.0-3.3V/cell

                                          LiIon: 2.9-3.2V/cell

                                          LiFe: 2.6-2.9V/cell

                                          Pb: 1.8V

Discharge Wattage: 8W

Balance Cells: 6 cells

Memory: 10 different charge/discharge profiles

Charge Method: CC/CV for lithium types and lead (pb) batteries, Delta-peak Sensitivity for NiMH/NiCd.

MANUAL AND SOFWARE:

6x80+Blue Charger Manual.pdf

Charger Master V1.02_0901.rar

This product was added to our catalog on Tuesday 22 December, 2015.
Reviews
Customers who bought this product also purchased
Gens Ace 1300mAh 14.8V <b> 45C </b> 4S1P Micro Race Battery Pack
Gens Ace 1300mAh 14.8V 45C 4S1P Micro Race Battery Pack
Gens Ace 1300mAh 14.8V <b> 75C </b> 4S1P Micro Race Battery Pack
Gens Ace 1300mAh 14.8V 75C 4S1P Micro Race Battery Pack
Lipo FatShark Batery 7.4V <b> 1000mAh </b> for Goggles FatShark
Lipo FatShark Batery 7.4V 1000mAh for Goggles FatShark
XT60 Harness for 2 Packs in Parallel
XT60 Harness for 2 Packs in Parallel
Lithium Polimer Charger Pack 18x23 Cm.
Lithium Polimer Charger Pack 18x23 Cm.
Gens Ace 1800mAh 11.1V <b> 75C </b> 3S1P Micro Race Battery Pack
Gens Ace 1800mAh 11.1V 75C 3S1P Micro Race Battery Pack
Shopping Cart more
0 items
Manufacturer Info
Other products
Notifications more
NotificationsNotify me of updates to SKYRC 6X80+ BLUE VERSION AC/DC (12/220V)
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Tell A Friend
 
Tell someone you know about this product.
What's New? more
Lion Power Li-Ion Battery Pack 8S10P 35.000mAh 29.6V
Lion Power Li-Ion Battery Pack 8S10P 35.000mAh 29.6V
725.00EUR
Manufacturers
Languages
English Espaņol
Currencies
Information
Financing
Shipping & Payment
Privacy
Conditions
Contact us
Site Map
RMA (Returns to SAT)

Copyright © 2019 ElectronicaRC.com
Powered by osCommerce

Shipping