Inicio My Account  Cart Contents  Checkout  
  Top » Catalog » Micro Dron » Micro Frames » V 250 UMMaGa My Account  |  Cart Contents  |  Checkout   
 ROV Dron Under Water
 Sales DJI
 DJI Innovations Products   DJI Goggles    DJI Promotion    Tello    Mavic Mini    Spark    Mavic 2    Mavic 2 Enterprise    Mavic AIR    Mavic Pro & Platinum    Phantom 4 Advanced    Phantom 4 RTK    Phantom 4 Pro    Phantom 4 Pro Obsidian    Phantom 3    Inspire 1    Inspire 2    Matrice 600 / 100 / Guidance    Matrice 200 / 210 / 210 RTK    CrystalSky    DJI Wind Series    Osmo    Osmo Pocket    Ronin & Focus    S1000, S900, S800    F450 / F550    A3 / A2 / N3 / Naza    LightBridge 2    Telemetry & Video    Power Systems    Z15 / H33D / H43D    Phantom 1 & 2    DJI Care
 Multicopter   Multicopter Combo (RTF)    Frame Multirotor    Flight Controller    Brushless Motors    Speed Control (ESC)    Proppeller    Landing Gear    Fly Simulator    Flight Case    Accessories    Fiber, Carbon, tube,..
 Gimbal   Frame & Parts    Gimbal Combo    Gimbal RTF    Electronic    GMB Motors    Gimbal with servos
 Micro Dron   FatShark Video Goggles    Micro BackPack    Micro Battery    Micro ESC    Micro Flight Control    Micro Frames    Micro Motor    Micro Power Set    Micro Proppeller    ImmersionRC Vortex 285    ImmersionRC Vortex 250    Micro accesories    Tramp HV 5.8Ghz
 Connex HD Video DownLink
 Thermal & Multispectral Cammeras
 Cable Cam
 FPV/RPV & UAVīs   FatShark Goggles    FatShark Accessories    Video Monitor    Camera    Video Tx & Rx    Set FPV    OSD / AutoPilot    Telemetry-GPS    Antenna    Antenna Tracking Systems    433Mhz Long Range    Pan & Tilt / HT    Plane Cockpit    Accessories
 R/C Products   Plane    Chargers    RC Transmitter & Rx    Servos    Motor / ESC / Prop    Electronic Circuit    Conectors & Adapters    Wire    Heat Shrink Tubing    Fly Simulator    Hardware    Tools
 Lipo Baterys   Bateries RC TX    Lipo Batteries 2S    Lipo Batteries 3S    Lipo Batteries 4S    Lipo Batteries 6S    Connectors    Lipo accesories
 Li-Ion Battery   Single Cells    Li-Ion Battery 3S    Li-Ion Battery 4S    Li-Ion 8S Battery    Li-Ion Battery 6S
 UgCS Software
 Droens Services
 Flight Case
 RPA Pilot Course (Drones)
Vortex 250 PRO UMMAGAWD 350mW ARF, Zipper Case Packaging
[V 250 UMMaGa]
529.00EUR 509.00EUR




 Vortex 250 Pro ARF Race Quad, UmmaGawd Edition

UmmaGawd Customization

The special UmmaGawd edition ships with Lumenier 2206-2350kV motors, 4-blade HQ props, a CCD camera equivalent to the HS1177, and the Race kit stage 1.

Vortex 250 PRO UmmaGawd Edition, ARF V.2 350mW, Zipper Case Packaging

ImmersionRC Vortex 250 PRO UmmaGawd Edition ARF

ImmersionRC have excelled again with this new Vortex 250 PRO UmmGawd. The Vortex 250 Pro UmmGaWd builds on excellence of the Vortex 250 Pro as well as using great feedback from top pilots and dreams of customers to take the Vortex 250 Pro UmmGawd to the next level. The Vortex 250 Pro UmmGawd comes with a lots of updated systems and new goodies integrated into a pure-bred racer.

The magic keeps coming with a next generation Fusion Gen2 Flight Controller comes with new integrated 32-bit “F3” processor (2x the performance of the previous version) with pre-loaded custom built Cleanflight software. Now there is also integrated a BlackBox recorder which is used as an extremely powerful tool to tweak you PIDs to perfection. The on-board full graphic OSD not only provides in-flight parameters it now sports a menu to set up your controller in the field using your flight controller and goggles or monitor (without the need for a laptop). Setup using either preprogramed setups or build your own. There are also several pre-programed OSD layouts that can be used. Look like a HUD of a fighter jet or a race layout with the data around the edges.

Motors have been upgraded from 2204  to V-Spec 2206-2350KV motors and the same V2 20A EzESC with Oneshot125 and rotorSENSE. The frame has also changed to a have flat 4mm carbon fiber arms.

There is still the punchy, integrated, 5.8GHz video transmitter with 350mW output power with 40CH selection and a SpiroNET Tx antenna. Easily allowing for channel separation. All channel setup via the OSD.

The lighting system has also been upgraded to version 2 and is sandwiched between the upper and lower frames at the rear of the quad. They are controlled by their own processor to allow them to be programed to what you like. The lighting options are endless. An upgraded ear-piecing Lost Model Alarm to help find your “lost” quad.

Just add a compatible R/C Rx (EzUHF preferred of course), and a battery, and go fly, everything else is included.

• 3k Twill-weave Carbon Fiber and custom injected plastic design
• 250 sized Race Quad with 4mm Carbon Fiber arms
Lumenier 2206-2350kV V-Spec Motors
• 2nd Gen Custom 20A EzESCs with OneShot125
Integrated “F3” Flight Controller (7x32-Bit Processors!), pre-loaded with Cleanflight
• Race-tuned out of the box
• Integrated full-graphic OSD, with on-screen control of....  Everything
• Pro-tuning options, select your favorite pilot!
• On-board BlackBox recorder to aid in pro-tuning (2MB)
• Integrated 40 channel NexWaveRF 5.8GHz Video 350mW Tx with Dynamic Power Control
• Direct connection to CPPM, Spektrum, S-Bus, XBus, SumD, SumH receivers
• Ear-piercing Lost Model Alarm (much louder than its predecessor)
• Tillable, Vibration-free Camera mount
• GoPro 3/4 mount included

Wheelbase: 250mm
Weight: ~415g without battery, or HD camera
Motors: 2206-2350 (CW and CCW)
ESCs: Custom “Gen2” EzESC 20A (22A peak) OneShot125, rotorSENSE
Power Requirements: 3s-4s LiPoly
Arms: 4mm Flat Carbon Fiber
Flight Camera: FatShark 700TVL CMOS v2
HD Camera: GoPro Hero, Hero 3/4 (not included)
Receiver Support: CPPM, S-Bus, Spektrum™ XBus, SumD, SumH

Included in the box: 

1x Vortex 250 Pro Race Quad, Fully assembled and tested
1x Vortex 250 Pro Zipper case, fits 250 and 270 versions (5" or 6" props), with two zipper pockets
2x ImmersionRC Branded battery straps (Installed)
1x SpiroNET Omni 5.8GHz antenna
1x PPM Interface Cable
1x Spektrum(tm) Interface Cable
1x SBus Interface Cable
8x OEM HQ 5040 4-Blade GFK Props

Your own TX/RX system (min 5 channel)
Video Goggles or monitor
Battery 1300~1500mAh, 3 or 4S


This product was added to our catalog on Monday 21 November, 2016.
Customers who bought this product also purchased
ABS Hard Case for <b> Mini Quadcopter 250 Class </b>
ABS Hard Case for Mini Quadcopter 250 Class
FRSKY <b>TFR8SB</b> 8/16CH Rx 2.4G <b>Compatible Futaba Sbus+RSS
FRSKY TFR8SB 8/16CH Rx 2.4G Compatible Futaba Sbus+RSS
Gens Ace 1300mAh 11.1V <b> 45C </b> 3S1P Micro Race Battery Pack
Gens Ace 1300mAh 11.1V 45C 3S1P Micro Race Battery Pack
Gens Ace 1550mAh 11.1V <b> 45C </b> 3S1P Micro Race Battery Pack
Gens Ace 1550mAh 11.1V 45C 3S1P Micro Race Battery Pack
Shopping Cart more
0 items
Manufacturer Info
ImmersionRC Homepage
Other products
Notifications more
NotificationsNotify me of updates to Vortex 250 PRO UMMAGAWD 350mW ARF, Zipper Case Packaging
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
Tell A Friend
Tell someone you know about this product.
What's New? more
GensAce <b> Fun Fly 1300mAh 100C </b> 3S1P lipo battery pack
GensAce Fun Fly 1300mAh 100C 3S1P lipo battery pack
English Espaņol
Shipping & Payment
Contact us
Site Map
RMA (Returns to SAT)

Copyright © 2019
Powered by osCommerce